How to Apply Decals – Pawsitively Puppy Love

Are you ready to apply your vinyl decal sticker? While your decal can add a personal touch to a variety of surfaces, like windows, walls, and the sides of vehicles, following our step by step guide to applying your decal will sure make it easy to do. I’ve even created a video here.

	Step 1 Clean the surface you are going to apply the decal to. Rubbing alcohol usually does the trick, but make sure you let it dry.
	Step 2 Prepare the sticker for application by firmly rubbing a squeegee or credit card across the clear transfer tape. This removes any air bubbles that may have formed and makes the sticker cling to the transfer tape.
	Step 3 Line the decal up where you want it to go And Remove the backing paper
	Step 4 Then take a hard item like a credit card or popsicle stick and rub it over the surface of the decal to make sure it is firmly sticking.
	Step 5 Start to pull off the transfer paper slowly at an angle. If any part of the decal is not sticking, then rub it more with the credit card making sure there are no bubbles. Once again use the credit card to smooth it out and make sure it is stuck to the item.

Voila! Anything can be monogrammed with an easy to apply vinyl decal!

*Use a pin to poke any air bubbles in the center and push the air out through the hole.
*The recommended optimum temperature for applying graphics is 70°F. For best results do not apply a sticker in extreme hot or cold temperatures.

STILL NEED HELP? - Contact us at woof@pawsitivelypuppylove.com